SMSR Size D20 (incl torque arm) with Alt Output Hub 55mm

Price on Request
In Stock
SKU
SMR-D20AB

Metric SMSR Range

Features
Shaft mounted drives remove the need for couplings, mounting plinths and have infinitely variable ratios due to the belt drive. They are also incredibly simple to fit and can be mounted in any position as no motor base is required.
• Grip-Loc hubs now avaliable for simple installation and removal
• Includes complete torque arm assembly
• Interchangeable with most other manufacturers
• Production line manufacturing guarantees tolerances and consistent quality.
• Gears produced on German manufactured hobbing centres to achieve the highest quality helical gear components.
• Pinions; 8620 steel
• Gears; 20MnCr5 steel
• All gears are ground
• Final heat treatment includes gas carburising to a depth of 1mm, then grinding to DIN class 6.
• Castings crack tested
• All units test run prior to final quality control checks
• Full traceability guaranteed with unique Challenge serial number.
• Backstops also available to prevent reversing
• Drive ratios exceed 150:1 with a belt drive
• Double lipped oil seals used throughout
• Standard ball and cylindrical roller bearings used - in stock around the world

Interchangeable with the Fenner SMSR and Sumitomo HSM for the equivalent model size and gearbox ratio. Grip Loc output hubs are also available.

Metric SMSR Range

Shaft Mounted Speed Reducers offer a flexible speed reduction solution due to their combination with belt drives, offering ratios in excess of 150:1. Challenge SMSR torque arms offer not only easy installation, but also allow the belt to be kept tensioned without having to move the motor or other prime mover. The SMSR’s themselves are offered in 3 ratios; 5:1, 13:1 and 20:1 which can accommodate driven shafts ranging from 25mm up to 150mm diameter. Maintenance is also an important consideration with our SMSR’s. Not only do we use standard bearings which are easily available globally, but Challenge can also supply all of the components that are used within the unit.

Simple Construction - Main Components
• Casing.
• Output hub, gear, seals and bearings.
• Intermediate shaft, gears, seals and bearings.
• Input shaft, gear, seals and bearings.

Fully Serviceable
Please see our catalogue for maintenance part product codes.
Bearings used are standard and available around the world.

Ease of Lubrication
There are four plugs on SMSR’s to cover lubrication in all available mounting positions:-
• Filler
• Level
• Drain
• Redundant
Depending on which of the 4 mounting positions is used, a different plug can perform a different role i.e. a filler in position 1 becomes the drain in position 2.

Backstops
All SMSR’s are available with backstops, although it is not advsied to use a backstop on the 5:1 ratio SMSR's.
Backstops are fitted behind the cover plate on the opposite end of the input shaft.

Reducing Bush Locking System
The Challenge reducing bush locking system allows multiple driven shaft sizes to be used with a single model of SMSR. The reducing bush locking system is simple to fit but requires keyways so many customers have now switch to the Grip-Loc system.

Challenge Grip-Loc Locking System
• Has sufficient torque transmitting ability to avoid the need for conventional shaft keys.
• Reversible assembly.
• Obviates problems caused by the usual operating environment and atmospheric conditions.
• By virtue of the design, Grip-Loc prevents the onset of fretting corrosion, which often causes problems with more conventional mounting systems.
• Much simpler to install and remove than keyed assemblies.
• Fits standard shafts with h11 tolerances.


Unit of Sale; Per Unit

More Information
SMSR - SizeD
SMSR - Standard Output Shaft Dia.50
SMSR - Casing Width258
SMSR - Overall Casing Height338
SMSR - Total Distance Thro.152
SMSR - Input Shaft Diameter25
SMSR - Input Shaft Keyway8x4x63
SMSR - Output Hub Collar Diameter100
SMSR - Machine To Fulcrum Hole centre24
SMSR - Fulcrum Width28
SMSR - Input Shaft Cover To Centreline68
SMSR - Input Shaft Length77
SMSR - Housing to Edge of Output Hub Collar17
SMSR - Main Housing Width118
SMSR - Horizontal Distance Of Output And Input Shaft Centres37
SMSR - Output And Input Shaft Centres at 90 Degrees116
SMSR - Vertical Distance Of Output And Input Shaft Centres110
SMSR - Vertical Distance Casing Top To Output Shaft Centre117
SMSR - Minimum Torque Arm Length700
SMSR - Maximum Torque Arm Length850
SMSR - Fulcrum Mounting Hole Diameter12
SMSR - Fulcrum Mounting Hole Centres75
SMSR - Output Hub Key14x9
SMSR - Output Shaft Centre To Top Of Torque Arm Mount88
SMSR - Torque Arm Mount To Casing Centreline76
SMSR - Fulcrum Thickness5
SMSR - Turnbuckle Length216
SMSR - Torque Arm Extension Length350
SMSR - Weight Single Reduction Unit - kgf34
SMSR - Weight Double Reduction Unit - kgf36
SMSR - Ratio20
Stock Code351-1115
Ask a question about: SMSR Size D20 (incl torque arm) with Alt Output Hub 55mm