Challenge Shaft Mounted Speed Reducers allow several customisations with regards to the output hub diameters. For example, a size J SMSR has a standard hub of 100mm that can be reduced with bushes to either 95mm or 90mm. The unit can also be supplied with an alternative hub accommodating 120mm which again can be reduced with bushes to 115mm or 110mm.
Gears and Motors
Worked example on how to determine the correct Worm Gear unit for your applications. Also includes relevant data tables.
The following instructions for backstop installation relate to the 13:1 and 20:1 ratio only.
Satisfactory performance depends on correct installation, lubrication and maintenance. Therefore, it is important that the instructions in the installation leaflet are followed carefully and an overview is given here.
Procedure for selecting the correct Shaft Mounted Speed Reducer for an application. Includes required data tables and a worked example.