FFX Coupling FRAS Tyre 120
FFX Tyre Coupling
• Up to 14675 Nm torque on 6 pole motors
• Up to 4° angular misalignment
• Up to 12° ‘wind up’ shock absorption
• Can accommodate simultaneous maximum misalignment in all planes
• Tyre can be changed without moving prime mover or driven machine
• Visual inspection of tyre to detect wear
• Zero backlash makes the FFX ideal for reversing duties as the load carrying cords are wound in both directions. Reversing drives are not a problem
• Steel clamping rings used throughout the range for superior tyre/clamping ring grip
• Fire resistant and anti static (FRAS) tyres available
• No lubrication required
• Taper bush and pilot bore flanges available
F120 (Fenner Fenaflex) / PX120 011303 (Dodge Paraflex)
FFX Tyre Coupling
The FFX tyre coupling range is available with 3 bore options; pilot bored, forward facing taper bore and backward facing taper bore. The FFX tyre couplings will accommodate shaft diameters from 13mm up to and including 127mm (5”) with nominal torque ratings ranging from 24Nm up to 14675Nm and max speeds of 4500 rev/min to 1000 rev/min.
Multiple Proven Solutions - Shaft Couplings
Challenge stock 7 proven shaft coupling methods which offer a range of benefits such as accommodating high torque loadings, shock loading, shaft misalignment in different planes, large shaft diameters and high speeds, with the HRC range are even able to offer fail safe operation. All of our shaft couplings are designed to be easy to fit and remove along with offering a long service life and competitive pricing.
The main choice for multiple planes of alignment between two shafts with the ability to transmit up to 14675Nm of torque. The load carrying cords within the coupling tyre are wound in both directions, offering zero backlash for reversing duties. Visual inspection of the tyre condition, no lubrication requirements, fire resistance/anti static tyre options and no requirements to move the shafts when a tyre needs replacing simplify maintenance and safety. The tyre couplings also offer superior shock absorption and vibration damping making it the first choice for heavy duty/high vibration applications such as crushers and mixers.
Jaw type couplings with an elastomer insert are available in a wide range of variations and configurations. The general layout for these couplings is a hub with teeth which interlock between elastomer lobes. The elastomer lobes act to dampen vibration and accommodate small amounts of mis-alignment. The extended tooth design offers fail safe operation due to the teeth interlocking should the insert fail, although this can damage the teeth. Both straight and curved tooth coupling types are available, although the zero-backlash curved tooth is more common.
Chain couplings offer a highest torque solution but cannot accommodate large shaft misalignment. They often come as a sealed unit within a casing filled with grease as this helps with its operation and increases the working life of the coupling. The coupling consists of 2 simplex sprockets which are joined by a necklace of corresponding duplex power transmission chain.
Unit of Sale; Per Unit
|Coupling - Max Bore Metric||-|
|Coupling - Maximum Diameter||-|
|Coupling - Hub Diameter||-|
|Coupling - Weight Per Piece OR Assembled - Kg||-|
|Coupling - Pilot Bore||-|
|Coupling - Bush Size||-|
|Coupling - Max Bore Imperial||-|
|Coupling - Clamping Element Diameter||-|
|Coupling - Flange Face To Tyre Centre||-|
|Coupling - Types F/H Half Total Distance Thro.||-|
|Coupling - Types F/H Boss Edge To Flange Face||-|
|Coupling - Type B Half Total Distance Thro.||-|
|Coupling - Type B Boss Edge To Flange Face||-|