FVC063-A-125 Hollow Pin Metric Conveyor Chain - 40p incl CL (5.00m)
FVC/CC Series Metric Hollow Pin Chain
Manufactured in accordance with DIN 8165. The range includes solid pin conveyor chains FV/C, hollow pin conveyor chains FVC/CC, deep link conveyor chains FVT/CE and metric scraper chains FV/CR. Link plates are punched from cold drawn steel for maximum toughness, whilst all round parts are fully machined, case hardened and ground. A range of roller and attachments options are available along with a complete range of high-quality sprockets to suit the entire chain range.
Special chains can be supplied to match existing chain specifications or alternatively they can be designed to suit our customers requirements.
FVC/CC Series Metric Hollow Pin Chain
FVC or CC series hollow pin conveyor chains originated from German standards. FV series chains are manufactured to Metric dimensions, with the pitch always being measured in mm. They are distinguishable from British standard conveyor chains by the flats on the top and bottom of the round parts. These flatted round parts prevent them spinning within the link plates, an issue that can occur on British chains, especially after an extended period of operation.
All our FVC series conveyor chains follow our Premium Manufacturing Standards. Although attachments are uncommon on hollow pin chains (as the hollow pin is used for any additional fixtures), attachments and sprockets can be supplied to suit our customers requirements. Chains can also be manufactured in a range of materials and heat treatments including stainless steel and can also be supplied with coatings, such as Zinc Plating.
We work hard so that your conveyor chain can too - Premium Manufacturing as Standard
All our conveyor chains are manufactured using the very latest manufacturing technology and techniques. With fully punched and shot peened link plates, CNC machined components, precision component fits, in house heat treatment, fully ground round parts and heavy-duty spin riveting, our standard is designed and proven to outperform other leading brands.
Cropped links from medium carbon steel
Our link plates are precision punched from cold drawn steel. Not only does this limit internal stress, but it also provides a precision hole pitch and increased tensile strength due to grain alignment.
Shouldered or flatted case-hardened bushes
Inserted with a press fit to prevent rotation and produced from on-size chromium-molybdenum seamless tube for minimum distortion, superior concentricity and maximum strength.
Shouldered or flatted case-hardened pins
Secured with a press fit and spin riveting. Selective in-house induction hardening allows deep case depth on wearing surfaces without stressing/cracking the pin ends during assembly and riveting.
Hardened and ground Precision Rollers
Through hardening and a light grind after heat treatment ensures a dimensionally accurate roller with a good hardness even after wearing during operation.
ISO 9001 and full traceability
Strictly manufactured to ISO 9001 with quality checks at every stage of manufacture. Our chains are fully traceable back to their original materials, which are also independently tested upon delivery.
Our Standard range and above features cover; British Standard (Z) Series, M Series and FV Series
Whatever your requirements, we have all the options covered
There are a wide array of nonstandard and heavy-duty conveyor chains used throughout industry today. These chains are often developed to offer extended service lives, increased strength, enhanced reliability and operational speed or perform special duties within the industries that they serve. Challenge has well recognised experience in many of these industries, including;
• Palm Oil
• Timber and Paper
• Steel manufacturing
• Waste and Recycling
• Bulk Material Handling
• Water Treatment
We can cater for a wide range of special requirements, which includes but is not limited to;
• Plasma nitride hardened pins and bushes
• Stainless steel (all grades)
• Sherardized plates and attachments
• Molykote dry lubricants
• Hot dip glavanizing
• Zinc/nickel plating
• Food grade oils
• Nonstandard chain pitches
Sprockets to suit our entire conveyor chain range
Transmission and Conveyor chains are driven by sprockets. The even distribution of power relies on accurate gearing between the sprocket teeth and the chain rollers or bush.
As sprockets greatly affect the life of the chain, all Challenge sprockets from cast through to precision machine cut are manufactured to strict tolerances and quality controls. We also advise all of our customers to replace their sprockets whenever a chain is replaced in order to maximise the chains life.
All lengths/coils of conveyor chain are supplied with a standard connecting link on the end of each length or coil.
Chains are manufactured to the following standards; DIN 8165
Unit of Sale; 5m box
|DIN Chain Number||FVC63|
|Chain - Hollow Pin Internal Diameter||8|
|Chain - Pitch||125|
|Chain - Width Between Inner Plates||22|
|Chain - Link Plate Height||30|
|Chain - Link Plate Thickness||4|
|Chain - Pin Length||45|
|Chain - Pin Length Con. Link From Chain Centreline||28|
|Chain - Roller Diameter||40|
|Chain - Bush Diameter||18|
|Chain - Pin Diameter||12|
|Chain - Breaking Load kN||46|
|Chain - Weight - kg/m||3.8|
|Chain - Shell/Small Roller Diameter||26|
|Chain - Flanged Roller Diameter||50|
|Chain - Flanged Roller Flange Diameter||63|