Imperial bearings R168 2RS C3

Price on Request
Contact Us For Availability
SKU
V-BBI-R168-2RS-C3

R Series Bearings

Features
Metric sizes
1600, 6000, 6200, 6300, 6800 and 6900 series
Imperial (inch) sizes
Popular R series are held in stock
Tapered roller
Available in both metric and imperial (inch) sizes

• Gcr15 high carbon chromium bearing steel is the standard material for bearing rings and balls
• Stainless steel shields are available
• Seals are Buna Nitrile and fluorocarbon, silicon and Teflon seals are available for special applications
• Retainers for corrosive environment, misalignment or high speed applications are available in stainless steel, nylon or phenolic resins

R Series Bearings

R Series radial ball bearings are light duty imperial bearings with similar characteristics to the 6000 series. They are available to suit shaft diameters from 3/16" (4.763mm) up to 1.1/2" (38.1mm) with either a ZZ arrangement double shields or 2RS(99R) arrangement double contact seals.

Materials
Rings & Balls
Gcr15 high carbon chromium bearing steel is the standard material for precision bearing rings and balls.

Retainers
The retainer is normally made of H62 copper sheet or 08F cold rolled steel belt, however, in cases of corrosive environment, misalignment, or high speed operation, stainless steel, nylon, or phenolic resins can be used upon request.

Shields & Seals
Shields are made of steel as standard, and the optional AISI-300 stainless is available, when required.
Buna Nitryl is the standard material used for the seals. Fluorocarbon, silicone, and Teflon seals are available for high temperature applications, upon request.

Rust Resistance
Under normal operating conditions, the rust resisting period is six months. After this period, the product should be checked and rust protected again if necessary, so as to prevent rust from occurring.

Packing
Generally the bearings are packed into plastic pipes or small boxes and then packed into a carton. If required, special packaging can be accommodated and must be specified prior to order.

Standard Bearings
Metric sizes
1600, 6000, 6200, 6300, 6800 and 6900 series
Imperial (inch) sizes
Popular R series are held in stock
Tapered roller
Available in both metric and imperial (inch) sizes
• Gcr15 high carbon chromium bearing steel is the standard material for bearing rings and balls
• Stainless steel shields are available
• Seals are Buna Nitrile and fluorocarbon, silicon and Teflon seals are available for special applications
• Retainers for corrosive environment, misalignment or high speed applications are available in stainless steel, nylon or phenolic resins

Bearing Units
• Triple lipped seals with shields as standard
• Sealed units for longer life
• Supplied with a grease nipple
• Pillow blocks (UCP)
• 2 bolt flange units (UCFL)
• 4 bolt flange units (UCF)
• Take-Up units (UCT)
• Bearing inserts also available (UC)
• Self aligning
• Fully interchangeable with other makes

Plummer Blocks
• Produced from high grade GG 20 cast iron
• Conform to ISO standards
• Robust design giving high strength and rigidity
• Available with:
- Taper bore bearing
- Spherical roller bearing
• High load carrying capacity
• Nitrile rubber (NBR) seals:
- V Ring Seal
- Double Lip Seal
• Sealed end covers available
• Supplied with grease nipple


Unit of Sale; Per Unit

More Information
Bearings - Series R
Bearings - Bearing Number R168
Bearings - Bore 6.35
Bearings - Outside Dia. 9.525
Bearings - Weight Each - kg 0.0032
Bearings - Width 3.175
Bearings - Chamfer (r min) 0.1
Bearings - Basic Dynamic Load Rating - kN 0.27
Bearings - Basic Static Load Rating - kN 0.14
Bearings - Max Runout Speed - Grease - rev/min 268
Bearings - Max Runout Speed - Oil - rev/min 136
Stock Code 0
Ask a question about: Imperial bearings R168 2RS C3