NM Coupling size 128 (2 x half body with PB and insert)
• Accommodates mis-alignment in the radial and axial direction
• Synthetic rubber intermediate ring
• Reduces shock, vibration and noise between the drive and driven system
• Protects against drive resonance and shock loads
• Available for shaft diameters from 7mm up to 95mm
• 13Nm of torque transmission up to 1600Nm
• Maximum 12500rpm through to 3000rpm
• Available in Solid Hub or Finished Bore
Nor-Mex TSCHAN E Pb72 Shore A
The Challenge NM coupling compliments our range of over 6 other types of coupling by offering dampening protection, impact mitigation, electrical isolation and mis-alignment accommodation in multiple directions with less clearance requirements than the FFX tyre coupling.
Multiple Proven Solutions - Shaft Couplings
Challenge stock 7 proven shaft coupling methods which offer a range of benefits such as accommodating high torque loadings, shock loading, shaft misalignment in different planes, large shaft diameters and high speeds, with the HRC range are even able to offer fail safe operation. All of our shaft couplings are designed to be easy to fit and remove along with offering a long service life and competitive pricing.
The main choice for multiple planes of alignment between two shafts with the ability to transmit up to 14675Nm of torque. The load carrying cords within the coupling tyre are wound in both directions, offering zero backlash for reversing duties. Visual inspection of the tyre condition, no lubrication requirements, fire resistance/anti static tyre options and no requirements to move the shafts when a tyre needs replacing simplify maintenance and safety. The tyre couplings also offer superior shock absorption and vibration damping making it the first choice for heavy duty/high vibration applications such as crushers and mixers.
Jaw type couplings with an elastomer insert are available in a wide range of variations and configurations. The general layout for these couplings is a hub with teeth which interlock between elastomer lobes. The elastomer lobes act to dampen vibration and accommodate small amounts of mis-alignment. The extended tooth design offers fail safe operation due to the teeth interlocking should the insert fail, although this can damage the teeth. Both straight and curved tooth coupling types are available, although the zero-backlash curved tooth is more common.
Chain couplings offer a highest torque solution but cannot accommodate large shaft misalignment. They often come as a sealed unit within a casing filled with grease as this helps with its operation and increases the working life of the coupling. The coupling consists of 2 simplex sprockets which are joined by a necklace of corresponding duplex power transmission chain.
Unit of Sale; Set
|Coupling - Min Bore Metric||18|
|Coupling - Max Bore Metric||55|
|Coupling - Maximum Diameter||128|
|Coupling - Hub Width / Length||70|
|Coupling - Hub Diameter||90|
|Coupling - Nominal / Rated Torque - Nm||262|
|Coupling - Weight Per Piece OR Assembled - Kg||8.1|
|Coupling - Max Speed - rev/min||5000|
|Coupling - Gap Between Coupling Faces / Flanges||3.5|
|Coupling - Torque Max - Nm||471|