RPX Coupling Half Body 48-F Taper Bored (GG) (1615)
• Fully machined with curved jaw design. This reduces vibration and allows for increased shock loading
• Designed to industry standard
• High torque for size
• Taper bore and pilot bore flanges
• 92 shore (yellow) and 98 shore (red) elements available
Rotex 48 GJL 92 ShA F (KTR Rotex Basic Code)
The RPX range of couplings offer a high-speed coupling solution that can accommodate up to 5 degrees of angular misalignment and can be fitted horizontally or vertically. They also resist wear as unlike other couplings where the inserts or subject to a bending stress, the RPX coupling inserts are subject to compression only.
RPX couplings fit a range of shaft diameters from 6mm up to 115mm with two different inserts of 92 shore and 98 shore offering a rated torque from 10Nm up to 3600Nm. The small type 10 coupling has a maximum speed of 19000 rev/min with the larger coupling having a maximum speed of 3750 rev/min. Hubs will be supplied with a pilot bore (finished machined upon request) or with a taper bore to suit our range of taper bushes.
Multiple Proven Solutions - Shaft Couplings
Challenge stock 7 proven shaft coupling methods which offer a range of benefits such as accommodating high torque loadings, shock loading, shaft misalignment in different planes, large shaft diameters and high speeds, with the HRC range are even able to offer fail safe operation. All of our shaft couplings are designed to be easy to fit and remove along with offering a long service life and competitive pricing.
The main choice for multiple planes of alignment between two shafts with the ability to transmit up to 14675Nm of torque. The load carrying cords within the coupling tyre are wound in both directions, offering zero backlash for reversing duties. Visual inspection of the tyre condition, no lubrication requirements, fire resistance/anti static tyre options and no requirements to move the shafts when a tyre needs replacing simplify maintenance and safety. The tyre couplings also offer superior shock absorption and vibration damping making it the first choice for heavy duty/high vibration applications such as crushers and mixers.
Jaw type couplings with an elastomer insert are available in a wide range of variations and configurations. The general layout for these couplings is a hub with teeth which interlock between elastomer lobes. The elastomer lobes act to dampen vibration and accommodate small amounts of mis-alignment. The extended tooth design offers fail safe operation due to the teeth interlocking should the insert fail, although this can damage the teeth. Both straight and curved tooth coupling types are available, although the zero-backlash curved tooth is more common.
Chain couplings offer a highest torque solution but cannot accommodate large shaft misalignment. They often come as a sealed unit within a casing filled with grease as this helps with its operation and increases the working life of the coupling. The coupling consists of 2 simplex sprockets which are joined by a necklace of corresponding duplex power transmission chain.
Unit of Sale; Per Unit
|Coupling - Min Bore Metric||-|
|Coupling - Max Bore Metric||-|
|Coupling - Maximum Diameter||105|
|Coupling - Assembled Length / Total Distance Thro.||104|
|Coupling - Hub Width / Length||39|
|Coupling - Hub Diameter||104|
|Coupling - Weight Per Piece OR Assembled - Kg||2.07|
|Coupling - Max Speed - rev/min||7100|
|Coupling - Torque 92 Shore - Nm||310|
|Coupling - Torque 98 Shore - Nm||525|
|Coupling - Bush Size||1615|
|Coupling - Max Bush Bore||42|
|Coupling - Gap Between Coupling Faces / Flanges||1.5|
|Coupling - Length||63.5|
|Coupling - Material||CI|