Simplex Pilot Bored Steel Sprocket ASA 140 x 12 - hardened teeth

Price on Request
Limited Stock Availability
SKU
PAS-1401B12H

ANSI Pilot Bore Sprockets

General
The material used is either C45 steel which can be both welded and hardened, or GG22 close grain cast iron.
All standard steel sprockets are produced from either sawn bar or from a forged block.
Special sprockets in small quantities are produced from a plate and then welded onto a hub.

ANSI Pilot Bore Sprockets
• Sizes 35 – 100 in simplex, duplex and triplex
• Sizes 120 – 160 in simplex and duplex
• All C45 steel construction
• Hardened teeth available for all sizes

ANSI Pilot Bore Sprockets

Sprockets to suit the American ANSI standard simplex, duplex and triplex roller transmission chains. Supplied with a pilot bore although machining to the final requirements can also be offered.

Linking drives and chains - Sprockets
Transmission and Conveyor chains are driven by sprockets. The even distribution of power relies on accurate gearing between the sprocket teeth and the chain rollers or bush.

As sprockets greatly affect the life of the chain, all Challenge sprockets from cast through to precision machine cut are manufactured to strict tolerances and quality controls.

Challenge are well known for the manufacture and supply of transmission sprockets to suit the wide range of transmission chains on offer from stock in our warehouses. Our stocked range includes BS Taper Bores in sizes 06B-24B, BS Pilot Bores in sizes 03B-32B, Plate Wheels in sizes 03B-32B, Double Simplex in sizes 06B-16B, Idler Bearing Sprockets in sizes 05B-20B and ANSI Pilot Bores in sizes 35-160.

Transmission Roller Chain Sprockets
Manufactured from medium carbon C45 which can be both hardened and welded or close grain GG22 cast iron for accuracy and wear resistance from our existing casting patterns. All standard steel sprockets are machined from a either a sawn or forged block which ensures and accurate tooth profile and a high-quality finished sprocket.

The standard range includes taper bore, pilot bore, plate wheels and idler sprockets.

Special Sprockets and Low Quantities
Challenge are able to manufacture special transmission roller chain sprockets when an item from the standard range does not suit the requirements. These sprockets are produced from plate before a boss is welded. This manufacturing process allows us to provide a cost-effective solution within a sensible time frame. We are also able to complete any design and tooth profile drawings for manufacture given the chains dimensions.

Machining
Finished machining can also be offered; for example taper bores, metric and imperial bores and keys, splines, gib head keys and many other options.


Unit of Sale; Per Unit

More Information
Sprocket - Sprockets Range 140
Sprocket - Execution Simplex
Sprocket - No. Of Teeth 12
Sprocket - Outside Diameter 7.58
Sprocket - Hub Diameter 4.1/2
Sprocket - Length Thro Bore 2.1/4
Sprocket - Duplex Tooth Width -
Sprocket - Triplex Tooth Width -
Sprocket - Stock Bore 1.1/2
Sprocket Type B
Stock Code 646-524
Ask a question about: Simplex Pilot Bored Steel Sprocket ASA 140 x 12 - hardened teeth